The Fillet Sealing process provides the following options:

By default, sealant type is specified by the cost model variable defaultSealantType (B2 Corrosion Inhibitant in starting point VPEs). With this setup option, users can override the default, and select from the sealant types listed in the lookup table sealant.

Sealant type determines Sealant Price, by default, which drives costs for sealant material—see Additional Direct Costs in Fillet Sealing Formulas.

By default, sealant price is looked up by Sealant Type in the lookup table sealant. With this setup option, users can override the default.

Sealant price drives costs for sealant material—see Additional Direct Costs in Fillet Sealing Formulas.

This is the time per unit length required to apply the sealant (in seconds per millimeter). By default, it is specified by the machine property Application Rate. Users can override the default with this setup option. This value drives cycle time—see Fillet Sealing Formulas.

This is the total length of sealant to be applied. By default, this is assumed to be a certain fraction of the sum of the subcomponent perimeters (where each subcomponent's perimeter is twice the sum of its length and width). The fraction is specified by the cost model variable sealantFactor (0.1 in starting point VPEs). Users can override the default with this setup option.

This value drives cycle time and additional direct costs—see Fillet Sealing Formulas.