Width of a strip of material added all around the flattened blank, to provide some spacing between the blank and the carrier strip and between adjacent blanks (5.00 mm, by default in aPriori starting point VPEs). This addition of material provides sufficient space between parts to accommodate cutting the part without damaging the immediately adjacent items. Note that because the trim strip is added to both the leading and trailing sides of each blank (left and right sides of each blank, if the coil flow is left-to-right), the spacing between adjacent parts equals twice the value entered (10.00 mm, by default in aPriori starting point VPEs).

Select one of the following options: