Nominal Wall Thickness

Nominal wall thickness is calculated by default, but can be specified by the user (0.10-15.00 millimeters)—see Additional User Inputs. If calculated, the following formula is used:

Nominal Wall Thickness = (2 * Average Wall Thickness + Maximum Wall Thickness) * 1.25/3

Nominal wall thickness is a linear combination of the following:

• Part average wall thickness (obtained from required PSO—see Part Surface Area, Projected Area and Perimeter, and Wall Thickness)

• Part maximum wall thickness (obtained from required PSO—see Part Surface Area, Projected Area and Perimeter, and Wall Thickness)