Materials and Stock Forms
Standard sheet thicknesses vary depending on the material selected. Aluminum, for example, ranges from 0.45 mm in thickness to 6.35 mm, while steel ranges from 2 mm to 160 mm. Widths are available in 4 ft. or 5 ft. Lengths are available in 8 ft. or 10 ft.
Materials Include the following:
• Aluminum: 3003, 5052, 6061
• Copper: 110
• Galvanized Steel: HR-1010, HR-1012, HR-1020
• Stainless Steel: 304, 316, 316L
• Steel: CR-1010, CR-1012, CR-1020, HR-1010, HR-1012, HR-1020
Material composition details include the following:
• Unit Cost (USD / kg)
• Density (kg / m^3)
• Shear Strength (MPa)
• Ultimate Tensile Strength (MPa)
Material details include equivalent DIN and EN name standards for use with regional VPEs.
Material stock details include the following:
• Thickness (mm)
• Width (mm)
• Length (mm)
• Unit Cost (USD / kg)
See
Material Selection for more information.