Variable Name | Where Used |
#min2RollBendingDiameterRatio | Ratio which determines smallest achievable roll diameter as a function of the top roll diameter of machine (1.15) |
referenceTensileStrength | Tensile strength at which single pass will switch to multipass for roll bending machine |
rollingSpeedAdjustmentFactor | Adjustment ratio of speed when yield stress approaches 90% of the ultimate tensile stress |
rollThicknessRatio | Ratio of part thickness as a function of machine capacity at which an additional pass should be added for rolling |
standardSheetLength | Default standard sheet length if no stock is available for computed utilization. |
standardSheetWidth | Default standard sheet width if no stock is available for computed utilization. |
standardStockLength | Default length of stock. Used to set the standard length of material stock. |