Modifying the Process-level Routings

This section shows you how to add process-level routings that are analogous to those of Laser Cut. Modify the AbrasiveJet Cut Component template as follows:

1 Find the line that starts with the following:

'Sheet Metal' ::=

2 In that line, select the following portion:

'[CTL]/Laser/[Bend]' |

3 Type control-c to copy the selected text.

4 In that same line, click immediately before the following:

'[CTL]/Turret/[Bend]'

5 Type control-v to paste the copied text. This adds a new alternative routing to the top-level template node.

6 Replace Laser with AbrasiveJet in the newly pasted text portion.

7 Copy the line that starts with the following (copy the entire line):

#'[CTL]/Laser/[Bend]' ::=

8 Paste it as a new line. This line will define the alternative routing that you added in step 5.

9 In the new line, change Laser to AbrasiveJet throughout.

10 Find the line that starts with the following:

‘Cutting’ ::=

11 Click at the end of that line and enter a vertical bar, |, followed by the AbrasiveJet process node name:

| 'AbrasiveJet Cut':'Sheet Metal'

You can copy the node name ('AbrasiveJet Cut':'Sheet Metal') from the Template Node Name field of the Node Attributes tab for the AbrasiveJet Cut process.