Parallel
The Parallel GCD Relation Type indicates that both bends are straight and end on the same GCD, and the distance between the bend axes are less than a given recognition distance, and the angle between them is less than some constant. The GCD details include:
 
Cost drivers
Description
GCDs
First
The name and number that identifies the first GCD. This information is an identifier only and is not used in any cost calculation.
 
Second
The name and number that identifies the second GCD. This information is an identifier only and is not used in any cost calculation.
Properties
Angle (deg)
The angle between the straight axes of the bends. The relation can only be established between two bends with Is Straight equal to True.
 
Distance (mm)
The maximum distance between the bend axes.
 
•