Cost drivers | Description | |
---|---|---|
GCD | Name | The name and number that identifies the GCD. This information is an identifier only and is not used in any cost calculation. |
Properties | Area (mm2) | The area of the GCD. |
Bar Position (mm) | Distance from the bar origin to the GCD location on the bar. | |
Is Planar? | True if the GCD consists entirely of planes with convex edges. | |
Maximum Cut Angle (deg) | Maximum angle between a plane in the GCD and the plane perpendicular to the stock axis. | |
Number of Planes | The count of plane surfaces contained within a GCD. | |
Outer Perimeter (mm) | Perimeter measured along the outside of the part. | |
Technique | Requested | The technique selected by you. If you have not selected a technique, this field is set to auto-select. |