Cost drivers | Description | |
GCD | Name | The name and number that identifies the GCD. This information is an identifier only and is not used in any cost calculation. |
Properties | Max Tool Diameter (mm) | For surfaces, this is the largest tool diameter entering from a given setup axis without touching other part surfaces. If there is no limiting diameter, Max Tool Diameter = -1. For pockets and bulk removal, this is the diameter of the sphere used to calculate the pocket or bulk removal skin. |
Total Volume (mm3) | The volume of the GCD. | |
Corner Pick Count | The number of corner picks in the GCD. | |
Corner Pick Volume (mm3) | The total volume of the corner picks in the GCD. | |
Technique | Requested | The technique selected by you. If you have not selected a technique, this field is set to auto-select. |
Selected | The technique used by aPriori. If the requested technique cannot be used, aPriori will select a technique that can be used. | |
Results | Time(s) | The time (in seconds) that it takes to machine the GCD or complete work on a technique. If there is more than one occurrence of the GCD or technique, this field shows the sum of the occurrences. |
Status | The costing status of the GCD or technique. A green icon indicates that costing was successful; a yellow icon indicates that costing succeeded with a warning, and a red icon indicates that costing failed. |