Cost drivers | Description | |
---|---|---|
GCD | Name | The name and number that identifies the GCD. This information is an identifier only and is not used in any cost calculation. |
Properties | Perimeter (mm) | The sum of lengths of all edges in the contour. |
SER Length (mm) | The length of the smallest enclosing rectangle. This value can be edited by you if aPriori determines an incorrect blank size. | |
SER Width (mm) | The width of the smallest enclosing rectangle. This value can be edited by you if aPriori determines an incorrect blank size. | |
Thickness (mm) | The thickness or gauge of the sheet metal blank or part (mm). This value is extracted from the CAD model. | |
Chamfer Direction | Indicates the direction of the chamfer with respect to the main surface. | |
Curved Length (mm) | The sum of lengths of non-straight edges in the contour. | |
Is Chamfered | Indicates if the edges of the GCD are chamfered. If true, the edges are chamfered. | |
Max Radius (mm) | The maximum radius of the curvature for non-straight edges of the contour. The value equals 0 if all edges are straight. | |
Min Radius (mm) | The minimum radius of curvature for non-straight edges of the contour. | |
Number of Coining Chains | The number of contiguous chains of coined edges. | |
Num Curved Edges | The number of non-straight edges in the contour. | |
Num Edges | The number of edges in the contour. | |
Straight Length (mm) | The total length of the straight edges on the perimeter of the part. | |
Worst Peninsular Ratio | The maximum (Peninsula Length/Peninsula Width) for all peninsula on a contour. Peninsula are the outstanding tabs on a contour of blank or complex hole. | |
Worst Peninsular Ratio2 | The maximum (Peninsula Length/Peninsula Width2) in 1/mm. Peninsula are the outstanding tabs on a contour of blank or complex hole. | |
Technique | Requested | The technique selected by you. If you have not selected a technique, this field is set to auto-select. |
Selected | The technique used by aPriori. If the requested technique cannot be used, aPriori will select a technique that can be used. | |
Results | Status | The costing status of the GCD or technique. A green icon indicates that costing was successful, a yellow icon indicates that costing succeeded with a warning, and a red icon indicates that costing failed. |